Connection Plugs - Generac HomeLink 6500 Serie Manual Del Usuario

7
Figure 2-7. Oil Drain/Fill
8
10
9
8
Figure 2-6. Generator Controls
DIPSTICK / FILL OPENING
OIL DRAIN PLUG
17
16
11
12
13
15
14
2.5.1 — Connection Plugs
2.5.1.1 — 120 VAC, 20 Amp, GFCI Duplex
Receptacle
This is a 120 Volt outlet protected against overload by a
20 Amp push-to-reset circuit breaker (Figure 2-8). Use
each socket to power 120 Volt AC, single phase, 60 Hz
electrical loads requiring up to a combined 2400 watts
(2.4 kW) or 20 Amps of current. Use only high quality,
well-insulated, 3-wire grounded cord sets rated for 125
Volts at 20 Amps (or greater).
Keep extension cords as short as possible, preferably
less than 15 feet long, to prevent voltage drop and possi-
ble overheating of wires.
Figure 2-8. 120 Volt AC, 20 Amp, GFCI
Duplex Receptacle
18
21
20
19
000202
HomeLink 6500 Series Portable Generator
000203