Denon DVD-2800II Instrucciones De Operación página 41

w When "2. TV TYPE" is selected:
MULTI (Factory default)
Select this when your TV is compatible with both
the NTSC and PAL formats.
NTSC signals are output from the video output
jacks when discs recorded in NTSC format are
played, and PAL signals are output from the
video output jacks when discs recorded in PAL
format are played.
NTSC
Select this when your TV's video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
PAL
Select this when your TV's video format is PAL.
If PAL is selected, output format is fixed to PAL.
To exit the TV type mode
Use the • and ª cursor buttons to select "VIDEO
SETUP", then press the ENTER button.
Press RETURN button, you can go back to the
previous screen.
e When "3. VIDEO OUT" is selected: (NOTE)
PROGRESSIVE (Factory default)
Select this when using the DVD-2800 connected
to a progressive type TV.
INTERLACED
Select this when using the DVD-2800 connected
to an interlace type TV.
4
To exit the video out mode
Use the • and ª cursor buttons to select "VIDEO
SETUP", then press the ENTER button.
Press RETURN button, you can go back to the
previous screen.
r When "4. VIDEO MODE" is selected:
VIDEO (factory default)
This mode is best suited for playing discs
containing video material.
FILM
This mode is best suited for playing discs
containing film material or video material
recorded with the progressive scan method.
AUTO
The set identifies the type of material on the disc
being played (film or video) and selects the mode
automatically. This mode is suited for playing
discs containing both film and video material.
To exit the video mode
Use the • and ª cursor buttons to select "VIDEO
SETUP", then press the ENTER button.
Press RETURN button, you can go back to the
previous screen.
NOTE:
If stripes of noise appear on the picture or the
picture is unclear when playing a specific DVD video
disc, try changing the video mode.
NOTE:
• For the component output only, it is possible to switch between interlace image output and progressive image output. It is not
possible to specify progressive image output for the Video output connectors or S-Video output connector.
2. TV TYPE
Remote control unit > V I DEO SE TUP
> MAI N PAGE
ENTER
TV TYPE --> NTSC TV
SELECT :
Remote control unit
3. V I DEO OUT
> V I DEO SE TUP
Remote control unit
> MAI N PAGE
ENTER
VIDEO OUT --> PROGRESSIVE
SELECT :
Remote control unit
4. V I DEO MODE
> V I DEO SE TUP
Remote control unit
> MAI N PAGE
ENTER
VIDEO MODE--> V IDEO
SELECT :
Remote control unit
ENGLISH
B
TV TYPE
MUL T I
NTSC
PAL
DEC I S ION: ENTER BUTTON
B
V I DEO OUT
PROGRESSIVE
I NTERL ACED
DEC I S ION: ENTER BUTTON
B
V I DEO MODE
V I DEO
F ILM
AUTO
DEC I S ION: ENTER BUTTON
41