8. Operation, shutdown, and disposal
8. Operation, shutdown and disposal
8.1 General information
The TLMR lubricator works automatically.
Still the function should be checked at re-
gular intervals.
8.2 Temporary shutdown
Set the corresponding DIP switch to the OFF
position to shut the system down
temporarily.
In case of longer shutdown observe the
notes stated in chapter "Transport, delivery,
and storage".
To start the system up again observe the
notes stated in chapter "Assembly".
Deactivate the TLMR Fig. 28
OFF
ON
DIP
1
2
3
4
8.3 Shutdown and disposal
If the product will be permanently shut
down, the local regulations and laws regar-
ding the disposal of contaminated equip-
ment must be observed. The product can
also be returned to the manufacturer for
disposal, in which case the customer is res-
ponsible for reimbursing the costs incurred.
The parts are recyclable.
8.4 Disposal of the batteries
• Collect used batteries separately in a
plastic bag that closes airtight.
• Dispose of used batteries in accordance
with the prevailing legal prescriptions in
an environmentally sound manner (col-
lecting points).
WARNING
Never recharge, short-circuit, expose to
heat over 85 °C , or throw batteries into
water. Do not drop, puncture or deform
batteries. In case of damage electrolyte
may leak from the battery. Observe the
battery manufacturer's safety data sheet.
Disposal of batteries Fig. 29
Li-ion Batteries
EWC-CODE: 16 06 05
EN
7
8
33