Electrical Shock Hazard; Check Operation; If Dishwasher Does Not Operate - Haier HDBC100AFS Instrucciones De Instalación

POWER SUPPLY CORD METHOD:
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
•
Plug into a grounded 3 prong outlet. Check that power supply cord does not
touch dishwasher motor or lower part of dishwasher tub. Reconnect power at
the fuse box or circuit breaker.

CHECK OPERATION

1. Read the Use and Care Guide that came with your dishwasher.
2. Check that all parts have been installed and no steps were skipped.
3. Check that you have all the tools you used.
4. Start dishwasher and allow it to complete the shorted wash cycle. After the first
two minutes, unlatch door, wait five seconds, then open door.
5. Check to see that there is water in the bottom of the dishwasher tub. Check that
dishwasher is working properly.
6. If the dishwasher is not working properly, disconnect power or unplug
dishwasher and see "If dishwasher does not operate" section.

IF DISHWASHER DOES NOT OPERATE

First check the following to possibly avoid the cost of a service call.
•
Has the circuit breaker tripped or the house fuse blown?
•
Is the door closed tightly and latched?
•
Has the cycle been set correctly to start the dishwasher?
•
Is the water turned on?
If none of these suggestions work, please see your User Manual for service contact
information.
WARNING

Electrical Shock Hazard

27