Make Electrical Connection - Haier HDBC100AFS Instrucciones De Instalación

NOTE: Shims must be securely attached to floor to prevent their movement
when the dishwasher is operated.
5. Place level against top front opening of tub. Check that dishwasher is level
from side to side. If dishwasher is not level, adjust front legs up or down until
dishwasher is level.

MAKE ELECTRICAL CONNECTION

Check "Electrical requirements" section to ensure you have the correct electrical
supply and recommended grounding method.
If you are:
•
Direct wiring, use Option 1
•
Using a power supply cord, use Option 2
Option 1, Direct wire method
Electrically ground dishwasher.
Connect ground wire to green ground connector in terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death, re, or
electrical shock.
1. Remove terminal box cover. Retain for later use.
2. Install a UL listed/CSA approved strain relief.
3. Route direct wire so that it does not touch dishwasher motor or lower part of
dishwasher tub.
WARNING
Electrical Shock Hazard
19