Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

IB520001EN
Installation Instructions – PN4LED Recessed Housing Platforms
Instructions d'installation – Plateformes de boîtier encastré PN4LED
Instrucciones de instalación de las plataformas del alojamiento
empotrado PN4LED
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
WARNING
Risk of Electrical Shock! Disconnect power at fuse
or circuit breaker before installing or servicing.
WARNING
Use only elements provided by IRiS Lighting
Systems. Use of other manufacturer's reflectors
voids the Underwriter Laboratories listings and
CSA certification and could constitute a fire hazard.
N
otee:
IRiS recessed luminaires (fixtures) are designed to meet the latest NEC requirements and are UL/cULus listed
in full compliance with UL 1598. Before attempting installation of any recessed lighting luminaire check your
local electrical code. This code sets the wiring standards for your locality and should be carefully studied before
starting. Platforms are airtight and meet or exceed the performance requirements of the Council of American
Building Officials 1995 Model Energy Code (CABO MEC) and prescriptive method used by other municipalities.
INSTALLATION
N
otee:
Non-IC Platform:The PN4LED housing platform are
designed for installation where it will not come in
contact with insulation. Thermal insulation must be
kept a minimum of three inches (3") away from the
housing sides, top and junction box. (Figure 1.)
If fixture is to be switched from wall switch, make
sure black power supply wire is connected to the
switch. DO NOT connect the white supply wire to
the switch.
WARNING
Risk of Fire! Supply conductors (power wires)
connecting the fixture must be rated minimum 90°C. If
uncertain, consult an electrician.
WARNING
Installation and servicing to be performed only by
qualified personnel. If not qualified, consult an
electrician.
CAUTION
For your safety read and understand instructions completely
before beginning installation.
Juction Box
Bar Hangers
Plaster Frame
4" NON IC HOUSING
Brand Logo
reversed out of
black
INS #
INS #
Top Access
Universal
Hanger Bracket
Housing
Adjustable Collar
Tabla de contenido
loading

Resumen de contenidos para Eaton IRIS PN4LED

  • Página 1 Brand Logo reversed out of black IB520001EN INS # INS # Installation Instructions – PN4LED Recessed Housing Platforms Instructions d’installation – Plateformes de boîtier encastré PN4LED Instrucciones de instalación de las plataformas del alojamiento empotrado PN4LED IMPORTANT: Read carefully before installing fixture. Retain for future reference. WARNING WARNING Risk of Electrical Shock! Disconnect power at fuse...
  • Página 2 Adjust housing platform position by sliding back and forth on bar hangers to desired position. Housing may Optional be locked into position by tightening bar hanger locking screws on housing platform. (Figure 8.) Screw “T” Figure 8. EATON IB520001EN Installation instructions...
  • Página 3: Electrical Connection

    (located on the plaster frame). Supply wire insulation must be rated for at least 90°C. The junction Figure 12. box is also rated for a maximum of eight no. 12 AWG branch circuit conductors suitable for at least 90°C. EATON IB520001EN Installation instructions...
  • Página 4 **DMX (+) OUT MAINS **DMX (-) OUT BLACK LOAD LINE LINE WHITE LED ARRAY NEUTRAL NEUTRAL GREEN GROUND DRIVER NOTE: *DMX 512 WIRING FURNISHED BY OTHERS. ALL DMX WIRING SHALL BE COMPLETED IN FIELD PER ANSI E1.112008 EATON IB520001EN Installation instructions...
  • Página 5 Figure 16. Module Springs Figure 14. Module Springs Figure 17. Locking Screw Figure 15. Figure 18. EATON IB520001EN Installation instructions...
  • Página 6 Reinstall the driver module into the housing, and lock the position using the captive thumbscrews. Driver Door Driver Assembly (Lutron Driver shown) Leg Hook Figure 19. Thumb Screw Figure 20. EATON IB520001EN Installation instructions...
  • Página 7 Boîtier • mural, veillez à connecter le fil d'alimentation noir à l'interrupteur. NE RELIEZ PAS le fil d'alimentation blanc à Cadre en plâtre Col réglable l'interrupteur. BOÎTIER SANS CAPACITÉ DE COUPURE DE 10 CM (4 pN) EATON IB520001EN Instructions d’installation...
  • Página 8 « T » de suspension. Pour verrouiller la position souhaitée, Figure 8. serrez la vis de blocage de la barre de suspension sur la plateforme de boîtier. (Figure 8) EATON IB520001EN Instructions d’installation...
  • Página 9: Raccordement Électrique

    1,27 cm (1/2 po). Consultez Raccord linéaire les étiquettes du luminaire pour vérifier sa compatibilité avec la tension de l'installation. Figure 12. Vérifiez qu'il ne reste aucun fil nu hors des connecteurs serre-fils. EATON IB520001EN Instructions d’installation...
  • Página 10 SORTIE ENTRÉE DALI VIOLET DALI DALI GRIS DALI SECTEUR ROUG NOIR ALIMENTATION ÉLECTRIQUE BLANC NEUTRE NEUTRE CIRCUIT DE VERT RANGÉE DE DEL TERRE TERRE SORTIE TERRE Au moins 30,5 cm (12 po) Figure 13. EATON IB520001EN Instructions d’installation...
  • Página 11 Figure 16. Ressorts du module Figure 14. Ressorts du module Figure 17. Vis de blocage Figure 15. Figure 18. EATON IB520001EN Instructions d’installation...
  • Página 12 Réinstallez le module de pilote dans le boîtier, et fixez-le à l'aide des vis à ailettes imperdables. Assemblage de Régulateur porte du dispositif (pilote Lutron illustré) Crochet Figure 19. Vis à ailettes Figure 20. EATON IB520001EN Instructions d’installation...
  • Página 13: Instalación

    Marco de Collar ajustable alimentación esté conectado al interruptor. NO conecte el yeso cable de alimentación blanco al interruptor. ALOJAMIENTO SIN IC (CONTACTO DE AISLAMIENTO) DE 4" (101,6 MM) EATON IB520001EN Instrucciones de instalación...
  • Página 14 El alojamiento puede bloquearse en su posición ajustando los tornillos de sujeción de los ganchos para colgar barras en la plataforma del alojamiento. (Figura 8.) EATON IB520001EN Instrucciones de instalación...
  • Página 15: Conexión Eléctrica

    1/2" (12 mm). Revise el etiquetado de la luminaria para asegurarse de que esté clasificado para la Figura 12. instalación de voltaje utilizada. Asegúrese de que no haya cables pelados expuestos por fuera de los conectores de las tuercas para cables. EATON IB520001EN Instrucciones de instalación...
  • Página 16 CARGA LÍNEA BLANCO CONTROLADOR NEUTRO NEUTRO de dejar el espacio apropiado para acceder a la luminaria. VERDE CONEX A CONEX A MATRIZ DE LED CONEXIÓN A TIERRA TIERRA TIERRA 12" (30 cm) mínimo Figura 13. EATON IB520001EN Instrucciones de instalación...
  • Página 17 Figura 16. Muelles del módulo Figura 14. Muelles del módulo Figura 17. Tornillo de sujeción Figura 15. Figura 18. EATON IB520001EN Instrucciones de instalación...
  • Página 18 Unidad de la puerta del Controlador controlador (se muestra imagen del controlador Gancho en forma de pata Lutron) Figura 19. Tornillo de ajuste manual Figura 20. EATON IB520001EN Instrucciones de instalación...
  • Página 20: Garantías Y Limitación De Responsabilidad

    Eaton provides a 5-year limited warranty on this LED lighting product. Refer to the complete warranty terms & conditions of sale at www.eaoNn.cNm/LighoingWarranoyTerms. Garanties et limitation de responsabilité Eaton offre une garantie limitée de 5 ans sur ce produit d’éclairage à DEL. Retrouvez toutes les modalités de vente et de garantie sur www.eaoNn.cNm/LighoingWarranoyTerms. Garantías y Limitación de Responsabilidad Eaton ofrece una garantía limitada de 5 años para este producto de iluminación LED.

Tabla de contenido