Eaton Portfolio P236 Instrucciones De Instalación

IB520034ML 703192
Installation Instructions – Portfolio P236 Pendant Mounting Kit for
2" LED Ceiling Mounted Fixture
Instructions d'installation - Trousse de montage P236 Portfolio pour
luminaire à DEL monté au plafond de 2 po
Instrucciones de instalación para el Kit de montaje suspendido
P236 de 2" para la luminaria LED de montaje en techo
IMPORTANT: Read carefully before installing fixture.
Retain for future reference.
WARNING
Risk Of Eltcorical ShNck! DiscNnntco pNwtr ao fust Nr
circuio brtaktr btfNrt insoalling Nr strvicing.
INSTALLATION
N Note: This fixture should be supported by main runners
or other structure that is capable of supporting
fixture weight of 7 lbs.
ImpNroanoe: When using electrical equipment, basic
safety precautions should always be followed, including
the following.
1. Mount swivel support to ears on flush mounted
junction box.
2. Place canopy on stem.
3. Pull incoming wire leads through stem and fixture
support mounting plate and attach with two
locknuts.
4. Connect incoming wire leads to fixture wiring with
lever nuts. Black to black, white to white, green to
green.
5. Mount fixture support mounting plate to housing
using the two screws (#6-32).
6. Insert swivel ball end of stem and fixture assembly
into swivel support and splice wires to power
supply leads.
7 . Slide canopy over swivel support and secure by
twisting to engage ears on swivel support.
8. Install trim per instructions provided with the
cylinder.
9. These instructions do not claim to cover all
details or variations in the equipment, procedure,
WARNING
Risk Of Firt! DN nNo insoall insulaoiNn wiohin 3
inchts (76 mm) Nf any paro Nf oht luminairt fixourt
Nr in a way ohao may tnorap htao.
or process described, nor to provide directions
for meeting every possible contingency during
installation, operation, or maintenance. When
additional information is desired to satisfy a
problem, not covered sufficiently for user's
purpose, please contact your Portfolio Lighting,
Eaton corporation representative.
Swivel Ball
Figurt 1.
TM TM
INS # INS #
Attach To Splice Box
Mounting Plate
(Attach To Cylinder)