HoMedics SHIATSU PERFECT TOUCH MCS-1000HJ Manual Del Usuario página 7

DEMO BUTTON
For a brief demonstration of the features of the massage cushion, press the DEMO
button. The unit will briefly go through each function. Once completed, the unit
automatically turns off. The LED light will blink to indicate active function.
NECK AND BACK SPOT MASSAGE
While the unit is in shiatsu mode, press either SPOT button to stop and focus the
shiatsu action in one place. Once the unit is operating in spot massage, you may
adjust the mechanism position by holding down either button until the desired
position is reached. The up arrow will move the mechanism upward and the down
arrow will move it downward. Once you release the button, the mechanism will stop
in that place.
HEAT BUTTON
This massage cushion is equipped with heat in the neck, back, and seat cushion.
For soothing heat, when massage is on, press the HEAT button and the
corresponding red LED light will illuminate. To deselect, press the button again and
the corresponding LED will turn off. For your safety, heat cannot be turned on if no
massage program is selected.
NOTE: When the POWER button is pressed for first-time use, the moving
mechanism will automatically move to the lowest position before starting a
massage program. After initial use, the mechanism will always park at the lowest
position. See note below regarding parking.
NOTE: The moving massage mechanism always "parks" or finishes in its lowest
position. It continues to this position after the power has been turned off. If the
electrical supply is interrupted, when power is restored, the mechanism will
"park" or move to its lowest position.
7