HP DESIGNJET T790 ePrinter Serie Instrucciones De Montaje Del Producto
Ocultar thumbs
Ver también para DESIGNJET T790 ePrinter Serie:
- Manual del usuario (210 páginas) ,
- Manual del usuario (233 páginas)
Enlaces rápidos
HP DESIGNJET
T790 and T1300
ePrinter Series
Product Assembly
EN
Instructions
Instructions d'assemblage
FR
du produit
Instrucciones de montaje
ES
del producto
Instruções de montagem
PT
do produto
© 2012 Hewlett-Packard Company
Large Format Division
Camí de Can Graells 1-21 · 08174
Sant Cugat del Vallès
Barcelona · Spain
All rights reserved
Printed in XXX
Hardware Setup:
EN
1- open the printer box
2- Stand assembly
3- Unpack more components
4- Power and network configuration
5- Printhead and cartridge setup
Software setup:
Experience HP Designjet cloud printing, using free
HP Designjet ePrint & Share. Now, it's easy to print
large-format documents from virtually anywhere,
using your laptop, printer touchscreen, iPhone®, or
iPad®.
Installation du matériel :
FR
1- Ouverture du carton de l'imprimante
2- Assemblage du support
3- Déballage des autres composants
4- Configuration réseau et alimentation
5- Installation des têtes d'impression et des
cartouches
Installation du logiciel :
Découvrez l'impression sur le Cloud HP Designjet
avec le logiciel gratuit HP Designjet ePrint & Share.
Il est désormais facile d'imprimer des documents
grand format depuis quasiment n'importe où à
l'aide d'un ordinateur portable, de l'écran tactile de
l'imprimante, d'un iPhone® ou d'un iPad®.
Instalación del hardware:
ES
1- Apertura de la caja de la impresora
2- Montaje del soporte
3- Desembalaje de más componentes
4- Configuración de red y alimentación
5- Instalación del cabezal de impresión y el
cartucho
Instalación del software:
Experimente la impresión remota de HP Designjet,
mediante la solución gratuita HP Designjet ePrint &
Share. Ahora resulta muy fácil imprimir documentos
de gran formato desde prácticamente cualquier
lugar mediante un portátil, la pantalla táctil de la
impresora, un iPhone® o un iPad®.
Configuração de hardware:
PT
1- Abra a caixa da impressora
2 - Levante a montagem
3 - Retire mais componentes da embalagem
4 - Configuração de rede e energia
5 - Configuração de cartucho de tinta e cabeçotes
de impressão
Configuração de software:
Experimente a impressão na nuvem HP Designjet
usando o
HP Designjet ePrint & Share gratuito. Agora, é
fácil imprimir documentos em grandes formatos de
praticamente qualquer lugar usando olaptop, a tela
sensível ao toque da impressora, o iPhone® ou o
iPad®.
Manuales relacionados para HP DESIGNJET T790 ePrinter Serie
Resumen de contenidos para HP DESIGNJET T790 ePrinter Serie
- Página 1 Software setup: Experience HP Designjet cloud printing, using free Instalación del software: HP Designjet ePrint & Share. Now, it’s easy to print Experimente la impresión remota de HP Designjet, large-format documents from virtually anywhere, mediante la solución gratuita HP Designjet ePrint &...
- Página 2 Product working area Read these instructions carefully...What you will need for this procedure Before you start unpacking, consider where you are going to put • Because the product is heavy, you may need three people to unpack it. When more than one the assembled product.
- Página 3 Open the box DESIGNJET Ouverture du carton T790 and T1300 ePrinter Series Apertura de la caja start-up Abra a caixa © 2010 Hewlett-Packard Development Company, L.P. Remove the accessories from the printer box. You will find the documentation and software Remove the stand box, which is the largest for your printer on top of the printer.
- Página 4 Lift up the sides and top of the printer box, and Dismantle the bottom of the printer box by dis- Cut and remove the straps around the stand Remove the pieces of cardboard. remove them from the printer. engaging each corner and then folding down box.
- Página 5 Stand assembly Assemblage du support Montaje del soporte Levante a montagem Open the stand box. Remove the cross-brace and the two pieces of Place the two pieces of packaging material on packaging material from each end of the stand the floor, spaced 40 cm apart, and place the box.
- Página 6 4+4=8 A screwdriver and 22 screws are provided Attach each leg of the stand to the cross-brace, Make sure you have used 4 screws Attach a foot to each leg, using four screws in in the stand box: 16 screws to assemble the using two screws on the outside of the leg and in each leg.
- Página 7 180° Return to the main body of the product, care- Remove the small flaps from each of the foam Remove the orange tape from the transparent Open the transparent covering and remove the fully turn the product upside down in order to end pieces.
- Página 8 Place the stand on the product slowly and When the legs are correctly located on the Lift the stand, keeping it upside down. There is a round yellow button protruding from carefully, so that the colored buttons on the product, attach them to the product using two the top of one stand leg, and a square green legs fit into the corresponding holes in the screws for each leg.
- Página 9 90° 101.2kg Check that the wheels on the stand are locked. Rotate the product 90 degrees. IMPORTANT: Hold the product by the foam end pieces and Remove the foam end pieces. At this point you will have two spare screws. make sure that the roll feeds are facing down- by the center rear, and rotate it until it stands wards.
- Página 10 Lay out the components of the basket. Fit the basket supports to the stand legs, one to Remove the transparent covering from the Unlock the brake lever on each of the four product. wheels by lifting the lever. each leg. Déposez par terre les composants du bac de réception.
- Página 11 Fit the two short tubes to the product’s feet, Attach the basket’s front tube to the two short Rest the basket’s rear tube on the supports that The basket is now complete. one on the front of each foot. Each tube should tubes on each foot.
- Página 12 Unpack more components Déballage des autres composants Desembalaje de más componentes Retire mais componentes da embalagem Remove all the orange tape pieces from the Open the Window. You will see a cardboard support attached to product, except for the ones coming from inside the product with tape.
- Página 13 90º 90º Carefully lift the cardboard support up and out Inside the right-hand side of the product, you Turn the cardboard support 90° to the right. Remove the cardboard carefully. of the product. It will not be needed again; will see a piece of cardboard. you can discard it.
- Página 14 Power and network configuration Configuration réseau et alimentation Configuración de red y alimentación Configuração de rede e energia If you find a USB flash drive in a plastic bag Connect the power cable to the product’s Connect the network cable or a certified USB inside the box, it contains the latest Firmware.
- Página 15 Look for the product name plate and stick it at On the front panel, the HP logo appears. Switch on power to the product using the switch Look for a product number label and stick it at the front right-hand side of the product.
- Página 16 Printhead and cartridge setup Installation des têtes d’impression et des cartouches Instalación del cabezal de impresión y el cartucho Configuração de cartucho de tinta e cabeçotes de impressão Open the cover on the left-hand side of the Insert the ink cartridges one by one. Each car- The product checks for the presence of ink product.
- Página 17 When you have inserted all of the ink car- The cartridges must be inserted the right way Pull the blue handle towards you as far as it Open the window and grasp the blue handle tridges correctly, the product must prepare around: the ink outlet in the catridge should of the printhead cover.
- Página 18 Press the OK key on the front panel when you Lift the handle up to open the printhead cover. The setup printheads exist only to prevent the Remove and discard all orange setup print- The front panel prompts you for the next step: escape of ink during ink cartridge installation.
- Página 19 Unwrap each printhead and remove all orange Insert the printheads one by one. Each print- Push each printhead into the slot until it clicks Pull the blue handle towards you as far as it parts. head is marked with its own colors, and should into place.
- Página 20 Note: for HP Designjet ePrint & Share you will need to perform the installation with the PC connected to minutes depending on the condition of the printheads and of the environment.
- Página 21 Push the removable stop towards the roll as far From the front of the product, place the spindle Media load for T790 & upper roll in T1300 If the blue removable stop is on the spindle, When the front panel prompts you to load pa- remove it.
- Página 22 Feed the leading edge of the paper into the Only for T1300: Media load for lower roll Only for T1300: Remove the spindle by lifting Only for T1300: If the blue removable stop is product until the product takes hold of it. Do Go to the rear of the product, and remove the out first the right-hand end, then the left.
- Página 23 The product will proceed to align the print- Only for T1300: Push the removable stop Only for T1300: From the back of the product, Only for T1300: Feed the leading edge of the heads. This process involves printing, and there- towards the roll as far as it will go.
- Página 24 This free service makes it easy to access, view, and re-print an exact copy of projects from virtually anywhere, using smartphones or tablets. 2 - HP ePrint is a HP web service that allows you to print by simply attaching a PDF, or other print-ready file, to an email and send it to your printer’s dedicated address.
- Página 25 1 - HP Designjet ePrint & Share allows you to automatically save a copy of all your prints in a cloud. Additionally, now it is easy to access, view, and re-print an exact copy of projects from virtually anywhere, using...
- Página 26 The connectivity wizard will now start and take A screen appears explaining what steps you will The connectivity wizard will help you configure Your information will be verified, when complete, you step by step through connecting your printer need to complete, click ´Continue´. your LAN and Internet connection, verify the click ´OK´.
-
Página 27: Importante
Continuar. électronique de l’imprimante. IMPORTANTE: Anote la dirección de correo A conectividade com o HP Designjet ePrint & electrónico de la impresora para la impresión de Share será verificada agora, prossiga. los correos electrónicos. Si usted es el administrador de la impresora, anote también el código de la... - Página 28 The firmware update screen will now appear, click Your firmware update will now be verified, when A final confirmation screen appears, telling Any firmware updates will automatically ´Continue´. complete, click ´OK´. you that you have completed the process, click download and install on your system. Note: If ´Continue´.
- Página 29 For USB connections: Connecting your product before installing the software can lead to product errors. Note: for HP Designjet ePrint & Share you will need to perform the installation with the PC connected to Internet. On the DVD you will find: Félicitations ! HP Designjet ePrint &...
- Página 30 HP Designjet ePrint & Share App by accessing the iTunes App seguridad de la eprinter (necesitará el código de la impresora y una cuenta en HP ePrint Center). store (for iOS), or ‘Google Play’ (for Android). Log ePrint &...
- Página 31 You can now, or at some later time, color-calibrate the paper type that you intend to use in the 1. Return to home screen 2. Go back to previous screen product. Color calibration is recommended for accurate color printing. It can be started from the Product Utility program installed as part of your product software, or from the front panel’s Image 3.
- Página 32 Insert the HP Start Up Kit DVD into your com- Insérez le DVD du Kit de démarrage HP dans Inserte el DVD del Kit de iniciación de HP en el Insira o DVD do Kit de inicialização HP no puter.