Cosatto NITTY GRITTY Manual De Usuario página 6

At the back of the child car seat, unclip the chest pad strap (c) and the shoulder straps
(d) from their connectors.
Feed the strap ends through the seat until they are clear of the cover and upper liner (e).
Re-thread the chest pad straps (f) and then the shoulder straps (g) back through the
upper liner and your chosen shoulder slot in the seat back. Make sure the straps are not
twisted.
Hook the shoulder straps back onto the connector (h) ensuring they fit correctly (i).
Hook the chest pad strap on to the connector (j).
Pull the adjustment strap forward to remove any slack (k).
9 - fitting the child car seat to the vehicle seat - 1
NOTE: In group 1 mode, the child car seat can only be fitted
using ISOFIX anchor points and with the top tether strap.
Before fitting the child car seat release the fabric fastener (a) and unroll the tether strap
behind the child car seat and bring it over the headrest and place it on the seat (b).
Place the child car seat onto the vehicle seat. Pull the ISOFIX arm handle (c) and draw
out the ISOFIX arms (d) until they are fully extended.
10 - fitting the child car seat to the vehicle seat - 2
Align the child car seat (a) and connect the ISOFIX arms onto the vehicle ISOFIX anchor
points (b) until a 'CLICK' is heard. The indicators on top of both ISOFIX arms should
show green (c) when the arms are correctly fitted.
11 - fitting the child car seat to the vehicle seat - 3
Push the child car seat back (a) until its backrest is in firm contact with the vehicle seat (b).
WARNING: Ensure that the ISOFIX arms are still fully engaged
with the ISOFIX anchor point (c).
Pull the child car seat back slightly to ensure the child car seat is locked.
12 - fitting the child car seat to the vehicle seat - 4
The tether strap may need to be lengthened so that the tether clip will reach the ISOFIX
anchor point. To lengthen the tether strap squeeze the tether strap adjuster (a) and pull the
tether strap out (b).
For hatchback and estate vehicles remove the parcel shelf (consult the vehicle handbook
for information on removing the parcel shelf).
Fit the tether clip to ISOFIX anchor point (c, d, e or f). The tether strap passes under the
headrest or remove the headrest if it interferes with the tether strap (consult the vehicle
handbook for information on removing the headrest).
Push the tether strap clip on to the ISOFIX anchor point (g) until the spring loaded catch
(h) fits over the bar.