Cebora SYNSTAR 270 T SRS edition Manual De Instrucciones página 28

F
Menu.
MENU
Touch to select this function.
Select to enter the Main Menu.
SELECTING THE WELDING PROCESS,
Process
MIG, TIG or MMA (see explanation in chap-
ter on MIG Process).
Parameters SELECTING PROCESS PARAMETERS (see
explanation under section Start Mode mode
3L in chapter on MIG Process ).
Accessories USE OF MACHINE ACCESSORIES (see ex-
planation in chapter on MIG Process).
Settings MACHINE SETTINGS MENU (see explana-
tion in chapter on MIG Process).
G
Job Menu (see explanation in chapter
JOB
on MIG Process).
6.3 MMA PROCESS.
A
A
The screen displays the welding current in amps and
the welding voltage in volts.
B
Hot Start.
This is the overvoltage supplied when the arc is ignited.
This is adjustable from 0 to 100% of the set welding cur-
rent.
28
B C F
C
Arc Force.
This regulates the dynamic characteristics of the arc.
This is adjustable from 0 to 100% of the set welding cur-
rent.
F
Menu.
MENU
Touch to select this function.
Select to enter the Main Menu.
SELECTING THE WELDING PROCESS,
Process
MIG, TIG or MMA (see explanation in chap-
ter on MIG Process).
Parameters PROCESS PARAMETERS SELECTION
• Hot Start.
This is the overvoltage supplied when the arc is igni-
ted.
This is adjustable from 0 to 100% of the set welding
current.
Turn knob 2 to select the parameter and confirm the
selection by pressing the knob.
Adjust this value by turning knob 2. To confirm the se-
lection simply hold down knob 2 or key
Press the DEF key to restore factory settings.
• Hot Start Time.
This is the overvoltage time supplied when the arc is
G struck.
Adjustment ranges from 0 to 100 sec.
Turn knob 2 to select the parameter and confirm the
selection by pressing the knob.
Adjust the value by turning same knob 2. To confirm
the selection press knob 2 or key
Press the DEF key to restore factory settings.
.
.