Assembling The Lawn Mower; Attaching The Handlebar - Stihl RMA 235 Manual De Instrucciones

7 Assembling the Lawn Mower

7 Assembling the Lawn Mower
7.1

Attaching the Handlebar

► Switch the lawn mower off, pull out the activation key and
remove the battery.
► Place the lawn mower on a level surface.
► Hold lower handlebars (1) against the lawn mower so the
bores align.
► Push screws (3) together with washers (2) through the
bores in lower handlebar (1) and lawn mower (4) from the
outside inwards, screw in and tighten to 3 Nm.
Both lower handlebars (1) are firmly attached to lawn
mower (4).
0478-131-9541-A
► Hold upper handlebar (5) against lower handlebars (1) so
the bores align.
► Place cable (10) into cable clip (8).
► On the side with the cable, push screw (6) through
bores (11) in cable clip (8), upper handlebar (5) and lower
handlebar (1) from the outside inwards.
► On the other side, push screw (6) through bores (11) in
upper handlebar (5) and lower handlebar (1) from the
outside inwards.
► Fit rotary knob (9) onto screws (6) on both sides and
screw in.
Upper handlebar (5) is firmly attached to lower
handlebars (1).
► Place the cable in cable clips (7, 12).
► Press cable clip (7) onto upper handlebar (5) and allow to
engage.
► Press cable clip (12) onto lower handlebar (1) and allow to
engage.
English
13