Installing The Batteries; External Input Mode - Sylvania 3819LC El Manual Del Propietario

CABLE WITH CONVERTER/
DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box
or if you use a satellite system, you can use the basic
connection shown here.
By using this connection you can also record scrambled
channels. However, channel selection must be made
with the converter box or satellite box. This means that
channels cannot be changed using the TV/VCR Remote
Control. Unattended timer recording is limited to one
channel at a time.
U T
N
75-ohm
Coaxial Cable
(not supplied)
ANT
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1. Set the TV/VCR channel selector to the output
channel of the Cable Converter Box or Satellite Box.
(Ex. CH3)
2. Select the channel to record from your Cable
Converter Box or Satellite Box.
Satellite Box or
Cable Box (not supplied)
From Cable System
or Satellite Dish
ANT
[Fig.7]

INSTALLING THE BATTERIES

1) Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2) Insert 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.

EXTERNAL INPUT MODE

When using an external input signal (another VCR or
video camera), connect the player's audio/video output
cables to the AUDIO IN/ VIDEO IN jacks of your
TV/VCR. Then press the
CHANNEL or
until "AUX" appears on the
screen.
- 11 -
AUX
button
EN
8E21