Carbon Filter; Bulb Replacement; Important - THERMEx Vertical 845 Manual Del Usuario

INSTALLING GREASE MESH FILTERS
• To install filters for the following four steps:
- Angle the filter into slots at the back of the hood.
- Push the button on handle of the filter.
- Release the handle once the filter fits into a resting position.
- Repeat to install all filters.
CARBON FILTER- not supplied
Activated carbon filter can be used to trap odors. Normally the activated carbon filter
should be changed at three or six months according to your cooking habit. The
installation procedure of activated carbon filter is as below.
1. Before installing or replacing the carbon filters, please remove power to the unit.
2. Press the filter lock and remove the mesh filter.
3. Turn the carbon filter on both side of the motor anti-clockwise. Replace the
carbon filters with the new carbon filters.
4. Place the mesh filter.
5. Connect the power supply to the wall socket.
 Make sure the filter is securely locked. Otherwise, it would loosen and cause
NOTE:
 When activated carbon filter attached, the suction power will be lowered.
dangerous.

BULB REPLACEMENT

Important :

Note:
 Before changing the lights, make sure that the appliance is plugged off.
 Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
 The bulb must be replaced by the manufacturer, its service
agent or similarly qualified persons.
 Always switch off the electricity supply before carrying out
any operations on the appliance. When handling bulb, make
sure it is completely cool down before any direct contact to
hands.
 When handling globes hold with a cloth or gloves to ensure
perspiration does not come in contact with the globe as this
can reduce the life of the globe.
9