THERMEx Vertical 845 Manual Del Usuario página 53

NOTE: Remember not to fix the screw too tightly, so that later height adjustment can
be done more easily.
9. Fix the chimney set into the chimney bracket and fix with 2 x screws (4mmx8mm),
then fix the outside chimney bracket(B) into wall with 2 x screws (4mm x 40mm),
pull out the expansion pipe to outside. See PIC 7.
10. Pull up the inside chimney and fix it into inside chimney bracket with 2 x screws
(4mm x 8mm).See PIC 8.
11. Take out the Aluminum filter and fix the safety hole with 2 x screws (4mm
x30mm).See PIC 9.
12. Before usage, read all the instructions and make sure that the voltage (V) and the
frequency (Hz) indicated on the identification plate (found inside the cooker hood)
and all the data inside the appliance are exactly the same as the voltage and
frequency in your home. Then plug the power lead into the power socket (or if
connecting directly to the main via a switched spur, ensure the work is carried out
by a competent, qualified person) and the cooker hood is then ready for use.
5