Operating The Controls - Waring Commercial WFP16SCD Manual De Instrucciones

OPERATING THE CONTROLS

• Plug the machine into an electrical outlet. The outlet must be
120V, 60Hz.
• There are three control buttons on the base unit.
The three controls are:
How they work:
HOW TO USE
Continuous use
For continuous processing, use the ON button which is located in
the middle.
Pulsing
• For rapid ON/OFF operation, use the PULSE. The motor runs as
long as you hold the button down; it stops when you release the
button.
• You control the duration of each pulse by the amount of time
you hold the button down. You control the frequency of pulses
by the rate at which you press the button.
• Pulsing gives you greater control over consistency when
chopping, blending and mixing.
• Pulsing is also useful in processing hard foods. Pulse the food
a few times to break it up into smaller parts. Then proceed with
continuous use after the pieces are broken up and easier to
process.
ON
OFF
PULSE
ON: Press the ON button to start
the motor.
OFF: Press the OFF button to stop
the motor.
PULSE: To pulse the motor, press the
PULSE button down, then
release. The motor will run as
long as you hold the button
down; it stops when you
release the button.
13