Using The Bit Holder; Use; Switching On And Off; Adjusting The Rotational Speed - Parkside PNS 300 A1 Traducción Del Manual De Instrucciones Original

Using the bit holder

After removing the chuck
holder .
♦ Insert a suitable bit into the bit holder
♦ Push the bit into the bit holder
stop .
The guidance and the magnetic holder keep the
bit firmly in place .
♦ To remove the bit, pull it out of the bit holder

Use

Switching on and off

Switching the appliance on:
♦ Press the ON/OFF switch
Switching the appliance off:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
pressed position with the locking button
Switching off continuous operation:
♦ Press the ON/OFF switch
again .

Adjusting the rotational speed

Press the ON/OFF switch
speed . Increasing the pressure increases the speed .

Changing the direction of rotation

WARNING!
► The rotation direction switch
be used/adjusted if the appliance is at a
standstill .
♦ Change the direction of rotation by pressing
the rotation direction switch
or right .
PNS 300 A1
you can use the bit
.
as far as the
.
.
.
. Lock it in the
.
and release it
lightly for a low
may only
towards the left

Activate lock

♦ Push the rotation direction switch
middle position . The ON/OFF switch
blocked .

Maintenance and cleaning

WARNING! RISK OF INJURY!
Switch the appliance off and remove
the power plug before starting any
work on the appliance.
The appliance is maintenance-free .
■ The appliance must always be kept clean, dry
and free from oil or grease .
■ Never allow liquids to get into the appliance .
■ Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleansers which
can damage plastic .
WARNING!
► If the connecting cable needs to be replaced,
this must be carried out by the manufacturer
or an authorised representative in order to
avoid safety hazards .
NOTE
► Spare parts which are not listed (e .g . carbon
brushes, switches) can be ordered using our
service hotline .
► Have the carbon brushes replaced by the
manufacturer, by Customer Service or a
similarly qualified person .
into the
is
GB │ MT │ 43 ■