Disassembly For Cleaning - F&P Eson 2 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
4 ENGLISH
iii

DISASSEMBLY FOR CLEANING

1. Unhook the Headgear Clips
2. Slide the forehead straps of the Headgear
from the top of the Mask Frame
3. Remove the Silicone Seal
4. Remove the Swivel
from the Elbow
5. Remove the Diffuser
from the Elbow
iv
CLEANING YOUR MASK AT HOME
Wash your mask (excluding the Headgear
and Diffuser
) after each use:
1. Hand-wash your mask in soap dissolved in lukewarm water.
Do not soak for more than 10 minutes.
2. Rinse thoroughly with fresh water, ensuring that all soap
residue has been removed.
3. Leave all parts to dry out of direct sunlight before
reassembling.
from the Mask Frame
.
downwards
.
from the Mask Frame
.
.
.
Wash your Headgear
and Diffuser
after 7 days of use:
1. Hand-wash your Headgear
water. Do not soak your Headgear for more than 10 minutes.
2. Gently hand-wash the Diffuser
lukewarm water; avoid scrubbing the material. Do not soak
your Diffuser for more than 10 minutes.
3. Rinse thoroughly with fresh water, ensuring that all soap
residue has been removed.
4. Leave all parts to dry out of direct sunlight before
reassembling.
Cleaning Cautions:
• Do not clean your mask with products containing
alcohol, anti-bacterial agents, antiseptic, bleach, chlorine
or moisturizer.
• Do not clean your mask in a dishwasher.
• Do not store your mask in direct sunlight.
The above actions may deteriorate or damage the mask and
shorten its life. If there is any visible deterioration do not use
your mask, but seek replacement part(s).
ENGLISH 5
in soap dissolved in lukewarm
in soap dissolved in
Tabla de contenido
loading

Tabla de contenido