Important Safeguards - Hamilton Beach 58146 Manual Del Usuario

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to
persons, including the following:
1. Read all instructions.
2. T his appliance is not intended for use by persons (including
children) with reduced physical, sensory, or mental capabilities,
or lack of experience and knowledge, unless they are closely
supervised and instructed concerning use of the appliance by a
person responsible for their safety.
3. Close supervision is necessary when any appliance is used by or
near children. Children should be supervised to ensure that they
do not play with the appliance.
4. To protect against risk of electrical shock, do not put cord,
plug, base, or motor in water or other liquid.
5. Unplug cord from outlet when not in use, before putting on
or taking off parts, and before cleaning.
6. Avoid contact with moving parts.
7. Do not operate any appliance with a damaged cord or plug,
or after the appliance malfunctions, or is dropped or damaged
in any manner. Call our toll-free customer service number for
information on examination, repair, or electrical or mechanical
adjustment.
8. The use of attachments, including canning jars, not recom-
mended or sold by the appliance manufacturer may cause
a risk of injury to persons.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter or touch
hot surfaces, including stove.
11. Keep hands and utensils out of blender jar and chopper bowl
while blending to reduce the risk of severe personal injury
and/or damage to blender. A rubber spatula may be used
but must be used only when blender is not running.
2
840203404 ENv01.indd 2 840203404 ENv01.indd 2

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS!
12. Blades are sharp; handle carefully – especially when
assembling, disassembling, or cleaning inside blender jar.
13. Do not use a broken, chipped, or cracked blender jar.
14. Do not use broken, cracked, or loose cutting blade assembly.
15. To reduce the risk of injury, never place cutting blade assembly
on base without blender jar or chopper bowl properly attached.
16. Always operate blender with lid in place.
17. When blending hot liquids, open vent opening of lid, and close
any lid openings intended for pouring. If pouring with lid in
place, ensure the hinged cap is securely in place. Hot liquids
may push lid off jar during blending. To prevent possible
burns: Do not fill blender jar beyond the 3-cup (710-ml) level.
With the protection of an oven mitt or thick towel, place one
hand on top of lid. Keep exposed skin away from lid. Start
blending at lowest speed.
18. Ensure collar on base of blender jar is tight and secure. Injury
can result if moving blades accidentally become exposed.
19. If the jar should twist or rotate when the motor is switched
ON, switch OFF immediately and tighten jar in collar or on
blender base.
20. Do not leave blender unattended while it is operating.
21. To disconnect cord, turn the control to OFF (O). Then remove
plug from wall outlet.
22. Do not use appliance for other than intended purpose.
23. Be certain the lid is securely in position before operating
appliance.
24. Do not attempt to defeat the cover interlock mechanism.
1/18/14 2:10 PM 1/18/14 2:10 PM