Technical Information; General Safety Advice; Working Safely - Parkside PDOS 200 A1 Instrucciones De Utilización Y De Seguridad

Technical information

Q
Rated voltage:
Duty cycle:
nom. power input:
no load speed:
Grinding wheel diameter: 150 mm
Grinding wheel width:
Grinding wheel bore:
Circumferential speed max.: 23.2 m / s
Weight including
removable parts:
Noise data:
Refers to A-weighted sound level.
Sound pressure level:
Sound level:
Values determined in accordance with En 61029.

General safety advice

J
C AUTION! In order to protect yourself from
the danger of electric shock, injury or fire when
using electrical power tools, please observe
the following basic safety precautions. Read all
these requirements before you use the electrical
power tool, and keep the safety advice in a
safe place.

Working safely

Q
1. Keep your working area clean and tidy.
J
A disorderly working area can lead to accidents.
2. Be aware of the effects of the envi-
ronment.
J
D o not leave electrical power tools out in the rain.
J
D o not use electrical power tools in moist or
wet surroundings.
J
E nsure that your working area is well lit.
J
D o not use electrical power tools in
areas where there is risk of fire or
explosion.
230 V∼ 50 Hz
S2 short-term
operation 30 min
200 W
n 2950 min
-1
0
20 mm
20 mm
7.5 kg
62 dB (A)
75 dB (A)
Introduction / General safety advice
Protect yourself from electric
3.
shock.
J
A void touching earthed objects such as pipes,
heating radiators, ovens or refrigerators with
parts of your body.
4. Keep other people at a safe distance.
J
Do not allow other people, in partic-
ular children, to touch the electrical
power tool or the mains lead.
Keep them away from your working area.
5. Store currently unused electrical
power tools in a safe place.
J
W hen not being used electrical power tools
should be stored in dry conditions in a high or
enclosed place, out of reach of children.
6. Do not overload your electrical power
tool.
J
B y keeping within the specified working range
of the tool you will work more safely and
achieve a better result.
7. Use the right electrical power tool for
the task.
J
D o not use low-output devices for heavy tasks.
J
D o not use an electrical power tool for purposes
for which it was not intended. For example, do
not use a hand operated circular saw for trim-
ming tree branches or cutting logs.
8. Wear suitable clothing.
J
D o not wear loose-fitting clothing or jewellery.
They could become caught on moving parts.
J
W e recommend that you wear anti-slip footwear
when working outdoors.
J
I f you have long hair, wear a hair net.
Use personal protective
9.
equipment.
J
W ear protective glasses.
J
W ear a dust mask if your work generates dust.
10. Attaching the vacuum dust extraction
device.
J
W here there are connection points provided
for vacuum dust extraction please ensure that
the connections are made and used properly.
11. Do not use the mains lead
for purposes for which it was
not intended.
GB/MT 33