Technical Data; Description Of Appliance; Method Of Operation - Stiebel Eltron ETT 350 Operación E Instalación

2. Operation instructions

2.1 Technical data

>70
95
Width „B"
Weight (with storage blocks)
Distance interval „a"
Connection
Power output
Dimensional charge
Max. charge P
H
Storage blocks
Number of packages (blocks)
Block weight
Additional heating (special accessory)
Power output
18
for the professional
B
a
Ø9
ETT 350
mm 1130
kg 188,5
mm 940
3/N/PE ~ 400 V 50 Hz
kW 3,5
kWh 24,5
kWh 28
piece 10 (20)
kg 142
kW 1,0
60 >100
85
95
[mm]
ETT 500
1480
259
1290
5,0
35
40
14 (28)
199
1,5
30
Installation and electrical connection must
be carried out by a qualified installer, fol-
lowing these instructions closely.

2.2 Description of appliance

1 Control panel
2 Side wall, right
3 Front wall
4 Air outlet grille
5 Air inlet grille
6 Fluff screen
7 Inside front wall
8 Storage blocks
9 Cover plate
10 Thermal insulation
11 Floor thermal insulation
12 Cable duct G
13 Air flow device K
E5 Heating element
M1 Blower fan
N5 Protective temperature regulator -
discharge
A1 Electronic charge regulator
V4 Operation and fault indicator
X16 Control signal adapter, 4-stage
X17 Output reducer, 4-stage

2.2.1 Method of operation

The storage blocks are heated by the heat-
ing elements located between the storage
block rows. Charging is infinitely adjusted
by means of the charging regulator R1.
245
A