Step By Step Instructions; Step 1 - Unpack Dual-Drawer Refrigerator; Step 2 - Prepare Dual-Drawer Refrigerator - Haier DD410RS Manual De Instalación Y Del Usuario

STEP BY STEP INSTRUCTIONS

STEP 1 - UNPACK DUAL-DRAWER REFRIGERATOR

Use two or more people to move and install dual-drawer refrigerator.
Failure to do so can result in back or other injury.
Cabinet edges along stamp/cut-out areas may be sharp. Avoid placing
hands, ngers or other appendages near these areas.
Failure to do so can result in cuts.
1. Remove and dispose of/recycle all packing materials. This includes the foam
base and all adhesive tape. Remove all protective packaging covering the
product.
2. Remove user manual and other printed material before turning on the dual-
drawer refrigerator.
3. Clean the exterior surface with a soft cloth.

STEP 2 - PREPARE DUAL-DRAWER REFRIGERATOR

1. Pull open the upper drawer. Remove the crisper bins and set aside.
2. Using two hands, lift up on the metal drawer divider rod to remove it from the
slots in the front and rear of the drawer.
3. Once the drawer divider rod is out of the slots, turn the rod so that it is at an
angle to the front of the drawer. Lift the rod slowly out of the drawer to avoid
bumping into the control panel, and then set aside the divider assembly.
4. Close the upper drawer to avoid damage during installation.
8
WARNING
Excessive Weight Hazard
WARNING
Cut Hazard