Electrical Requirements - Haier DD410RS Manual De Instalación Y Del Usuario

ELECTRICAL REQUIREMENTS

Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, re or electrical shock.
Before you move your dual-drawer refrigerator into its final location, it is important
to make sure you have the proper electrical connection.
Recommended Grounding Method
A 115 volt, 60 Hz, AC only 15- or 20-amp fused, grounded electrical supply is
required. It is recommended that a separate circuit serving only your dual-drawer
refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not
use an extension cord.
NOTE: Before performing any type of installation or cleaning, disconnect the dual-
drawer refrigerator from the electrical source. When you are finished, reconnect the
dual-drawer refrigerator to the electrical source and reset the temperature controls
to the desired setting.
WARNING
Electrical Shock Hazard
7