Step 3 - Install Dual-Drawer Refrigerator - Haier DD410RS Manual De Instalación Y Del Usuario

STEP 3 - INSTALL DUAL-DRAWER REFRIGERATOR

Depending on the material of your countertop, use either Method 1 - Install to
Countertop or Method 2- Install to Adjacent Cabinet to secure your dual-drawer
refrigerator.
Do not use dual-drawer refrigerator until completely installed.
Do not push down on open drawer.
Failure to follow these instructions can result in serious injury or cuts.
METHOD 1 - INSTALL TO COUNTERTOP
Attach the Anti-Tip Brackets
1. Pry hole covers from the top of the cabinet to reveal the holes used to install the
anti-tip brackets.
2. Open the upper drawer and leave it open to install the anti-tip bracket.
3. Remove the anti-tip brackets and screws from the accessory bag.
4. With the screws provided, fasten the anti-tip bracket to one side of the top of
the cabinet
Level the dual-drawer refrigerator
Adjustment of the leveling legs under the dual-drawer may be necessary for a
proper fit in the cabinet opening.
1. Adjust the height of the rear of the dual-drawer by raising or lowering the rear
leveling legs, and then begin to slide the dual-drawer into the under counter
opening.
2. Adjust the front of the dual-drawer, by raising or lowering the leveling legs, until
it fits under the countertop, with enough space to install the anti-tip bracket to
the underside of the countertop.
WARNING
Tip Over Hazard
9