Assembly; Assembling The Handle - Craftsman 247.889330 Manual Del Usuario

Ocultar thumbs Ver también para 247.889330:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

For Parts Call 606-678-9623 or 606-561-4983
For Parts Call 606-678-9623 or 606-561-4983
IMPORTANT: This unit is shipped with oil in the engine. After
assembly, see page 12 for fuel and oil details.
IMPORTANT: Reference to right or left side of the mower is observed
from the operating position.
WARninG
The mowing deck is capable of throwing objects. Failure to operate
the mower without the discharge chute in the proper operating posi-
tion could result in serious personal injury and/or property damage.
WARninG
Disconnect the spark plug wire and ground it against the engine to
prevent unintended starting.
LOOSe PARTS in CARTOn
The following items are packaged in a bag:
Operator's Manual, Oil drain hose, Water hose coupler, Engine Manual
TOOLS needed fOR ASSembLY
A set of adjustable wrenches and tire gauge
RemOvinG The uniT fROm The CRATe
1.
Cut straps, if present, securing unit to pallet. Leave unit on pallet
during assembly
2.
Remove any protective packaging and plastic tie straps.
3.
After assembling the handle, to safely remove unit from pallet,
cut off cardboard and remove screws to free the mower from the
crate.
RemOvinG The ChuTe hOLdeR
WARninG
The chute holder must be removed and discarded before operating
the mower.
1.
Locate the chute holder which secures the discharge chute in a
vertical position, Figure 1.
2.
Pull chute back towards the engine. While holding the chute with
one hand, remove the chute holder using your other hand.
3.
Carefully lower the chute against the deck and discard the chute
holder.

ASSembLinG The hAndLe

1.
Remove lower star knobs and carriage screws from lower handle,
Figure 2.
2.
Pivot upper handle into operating position, Figure 3. Be careful
not to bend or kink the cables when pivoting the handle.
3.
Install carriage screws and knobs removed earlier.
4.
Tighten the upper and lower star knobs and carriage screws to
secure the upper handle to the lower handle, Figure 3.

ASSEMBLY

www.mymowerparts.com
www.mymowerparts.com

Figure 1
Figure 2
Figure 3

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido