Recommended Brushes - Tornado 99732 Manual De Operaciones Y Mantenimiento

RECOMMENDED BRUSHES

Material
PPL (Polypropylene)
NYLON
TYNEX
BRISTLE THICKNESS
PAD HOLDER
BD 32/26 P/N
48903110
48903120
48903130
48903140
48903150
48803050
CHARACTERISTICS
Good wear resistance. Maintains characteristics with hot water up to 140°F (60°C). It is
not hygroscopic.
Excellent wear resistance, even with hot water over 140°F (60°C). It is hygroscopic. It
looses its physical characteristics over time.
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the
floor or ruin the polish.
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
On irregular floors with deep joints or relieves, it is recommended to use softer bristles
which penetrate more easily and deeper. Please be aware that when brush bristles are
worn out and therefore too small they become rigid and unable to penetrate and clean
deeper. This may also happen with thicker bristles creating brush vibration.
It is equipped with anchor points which permit the blocking of the abrasive pad during
work. The pad holder is recommended to clean smooth floors.
Qty Description
2 Brush PPL .3
2 Brush PPL .6
2 Brush PPL .9
2 Brush TYNEX
2 Brush 5-Mix
2 Pad holder w/Green
center lock
Use
Delicate floors
Normal floors
Smooth floors with small joints and persistent dirt
Floors of resistant material and particular dirty
For all types of floors
For pads of 17" for smooth surface cleaning
22