Mounting Steps - Lenze L-force E94AZRS0544 Instructions De Montage

5 Mechanical installation
Mounting variant

Mounting steps

5.3.2 Mounting steps
How to proceed during the mounting process:
1. Prepare threaded holes on the mounting plate:
–
M6 for E94AZxS0544
–
M8 for E94AZxS0954
2. Assemble the threaded holes with screws and washers:
–
For filters and the standard device, use four screw and washer
assemblies or hexagon socket screws, respectively (property class 8.8),
with washers.
–
Do not turn in the screws completely yet.
3. Mount the filter on the prepared mounting plate.
–
For now, just tighten the screws in a hand−tight fashion.
4. Mount the standard device on the prepared mounting plate.
–
Observe the notes in the documentation for the standard device.
–
For now, just tighten the screws in a hand−tight fashion.
5. If required, pre−assemble further units.
6. Align all units to each other.
7. Tighten all units on the mounting plate.
Tightening torque:
–
10 Nm (88.5 lb−in) for E94AZxS0544
–
25 Nm (221 lb−in) for E94AZxS0954
42
l
SSP94FF604
EDK94AZRS6 DE/EN/FR/ES/IT 7.0