Mounting Steps - Lenze L-force 9400 Serie Instrucciones Para El Montaje

3 Mechanical installation

Mounting steps

3.3 Mounting steps
Proceed as follows for the installation:
1. Prepare M5 threaded holes on the mounting plate according to the
mounting grid.
–
Start on the left with the threaded holes for the installation backplane
of the E94AZPNxxxx power supply module or for the E94AZEX100 DC
feeding point (observe the accompanying Mounting Instructions!).
2. Screw the components onto the mounting plate. Do not yet tighten the
screws.
–
Use M5 screw and washer assemblies or M5 hexagon socket screws
with washers.
–
The screw joint in the installation backplane may not jut out more than
7 mm.
3. Align all components.

Note!
The installation backplane fixing screws are not tightened until the
busbars are connected.
36

EDK94ZPM113 DE/EN/FR/ES/IT 1.0