Memory/Preset Operation - Toshiba RAS-M10SMUV-E Manual Del Propietário

MEMORY/PRESET OPERATION

Store the frequently used operation setting by using the MEMO button for convenience.
Start the air conditioner in the operation mode that you want the remote controller to
memorize.
Push the button as follows while the air conditioner is in operation.
a MEMO button
Push this button briefly to store the setting.
All icons are currently displayed except for the clock display and
b MEMO button
Push and hold the MEMO button for more than 3 seconds while the display flashes.
The mark is indicated and the setting is memorized.
• If you do not push the MEMO button within 3 seconds or if you push another button,
the MEMORY setting is cancelled.
• Operation modes which can be memorized with using the MEMO button are MODE,
Temperature, FAN, TIMER and High power.
To operate the air conditioner with the setting stored using the MEMO button.
a PRESET button
Push the PRESET button.
The setting stored by the MEMO button will be indicated and the air conditioner
operates as per the setting.
• The OPERATION lamp (green) on the panel of the indoor unit is illuminated, and
operation starts after approximately 3 minutes.
• Initial setting:
MODE : AUTO
Temperature : 22
mark flashes.
15 EN