Turning The System On - Bose Solo Guía De Usuario

6. Place your TV on the sound system, making sure the TV base is centered and does
not hang over any edge of the system.
CAUTION: If your TV comes with an anti-tip device, install it according to the manufac-
turer's instructions and adjust the tether as instructed after placing the TV on top of the
system. Installing an anti-tip device is recommended when using a TV with this product. If
your TV did not come with an anti-tip device, you can get one from most retail TV suppliers.
7. Plug the sound system power cord into a live AC outlet.
A moment after applying power, the system emits two tones indicating that it is ready
to use.

Turning the system on

1. Press the power button
2. Turn on your TV.
3. Turn off your TV's built-in speakers:
To enjoy the full benefit of hearing TV audio through the Solo TV sound system, the
internal speakers in your TV should be turned off. Newer TVs usually have a setup
menu item for turning off speakers. Older TVs may have a speaker on/off switch on
the rear panel near the audio output connectors.
• If you have a TV with a setup menu, use the remote that came with your TV to
locate the menu item and set the TV speakers to off. If your TV does not have a
menu setting for turning off the internal speakers, exit the audio menu and reduce
the TV volume to its lowest setting.
• If the rear panel of your TV has a speaker on/off switch, set it to the off position and
adjust the TV volume to about 80% of the highest volume.
Note: To confirm your TV speakers are off, press Mute on the Bose remote and
check that no sound is coming from the TV.
CAUTION: Be sure to center the base of
your TV on the top of this product.
on the Bose remote.
®
S S
YSTEM ETUP
English – 11