Other Safety Instructions; Operating Times - MTD H15 Instrucciones De Funcionamiento

English
The unit may recoil if the rotating

blade strikes an object which
cannot be cut immediately.
Recoils may be strong enough
to throw the unit and/or user
in any direction and may cause
the user to lose control of the
unit. Recoils may occur without
warning if the blade gets caught,
jams or locks. This can easily
happen in areas in which the
material to be cut is difficult
to see.
Never use the undergrowth blade

to cut undergrowth thicker than
12.7 mm. Otherwise, violent
recoils may occur.
When using the cutting blade,

the cutting attachment cover
must always be attached.
Do not attempt to touch or stop

the blade while it is rotating.
A rotating blade may cause

injuries, even when the engine
has been switched off or the
throttle has been released.
Hold the unit firmly until the blade
has come to a standstill.
Do not run the engine at high

speed when it is not cutting.
If you strike or ensnare a foreign

object, immediately switch
off the engine and check whether
the unit has been damaged.
Have the repair damaged before
continuing to use the unit.
Do not use the unit with a bent,
cracked or blunt blade.
Throw away bent, twisted,
cracked or broken blades.
Do not sharpen the cutting blade.

The sharpened tip of the blade
may break off during operation.
This may result in serious
injuries. Replace the blade.
After operating the unit
Clean the cutting blades with

a household detergent to remove
any remnants.
Lubricate the blade with machine
oil to prevent rust.
Store and lock away the blade

securely to protect it from
damage and unauthorised use.
6

Other safety instructions

As long as the tank still has petrol

in it, never store the unit in a buil-
ding where vapours could come
into contact with sparks or naked
flames.
Leave the engine to cool down

before transporting or conveying
the unit. Attach the unit securely
for transportation.
Empty the fuel tank before trans-

porting the unit.
Store the unit in a dry condition,

locked away or high up to pre-
vent unauthorised use and
damage. Keep the unit away
from children.
Never douse or splash the unit

with water or other liquids.
Keep the handle bar dry, clean
and dust-free.
Clean the unit after each use
and follow the instructions
for cleaning and storage.
Dispose of waste petrol/oil

or any packaging remnants
in accordance with local
regulations.
Keep this manual.

Read it frequently and use
it to instruct other users.
If you lend this unit to somebody
else, also include this manual.

Operating times

Observe the national/municipal
regulations concerning times
of use (if required, ask your local
authority).
Symbols on the appliance
This operating manual describes
safety and international symbols
and pictograms which may
be displayed on this unit.
Read this user handbook in order
to familiarise yourself with all
safety, installation, operating and
repair instructions.
Attention!
!
Before starting
up the unit, read
the operating
instructions!
Operating manual
Wear eye, hearing
and head protection.
While operating
this unit, wear heavy
duty boots and
protective gloves.
Keep third parties
away from the danger
area!
Ejected objects and
rotating parts may
cause serious injuries!
Risk of injury from
rotating parts!
Keep hands and feet
away from rotating
parts.
Beware of hot
surfaces!
Keep fire away from
the fuel tank!
Petrol/Oil!
Always use clean and
fresh lead-free petrol
for mixing petrol.
Use only authorised
oil according to the
operating manual
for mixing petrol.
Do not fill up with fuel
of specification E85!
Maximum rpm.
Do not let the unit
run more quickly than
the maximum rpm.