Safety Instructions; Electrical Connection; Water Connection - Zanussi ZWI 71000 WA Manual De Instrucciones

Ocultar thumbs Ver también para ZWI 71000 WA:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Before maintenance, deactivate the appliance and disconnect
the mains plug from the mains socket.
Do not use water spray and steam to clean the appliance.
Clean the appliance with a moist soft cloth. Only use neutral
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.

SAFETY INSTRUCTIONS

INSTALLATION
Remove all the packaging and the transit bolts.
Keep the transit bolts. When you move the
appliance again you must block the drum.
Always be careful when you move the appliance
because it is heavy. Always wear safety gloves.
Do not install or use a damaged appliance.
Obey the installation instruction supplied with
the appliance.
Do not install or use the appliance where the
temperature is less than 0 °C or where it is
exposed to the weather.
Make sure that the floor where you install the
appliance is flat, stable, heat resistant and clean.
Make sure that there is air circulation between
the appliance and the floor.
Adjust the feet to have the necessary space
between the appliance and the carpet.
Do not install the appliance where the appliance
door can not be fully opened.

ELECTRICAL CONNECTION

The appliance must be earthed.
Always use a correctly installed shockproof
socket.
Make sure that the electrical information on the
rating plate agrees with the power supply. If not,
contact an electrician.
Do not use multi-plug adapters and extension
cables.
Make sure not to cause damage to the mains
plug and to the mains cable. Should the mains
cable need to be replaced, this must be carried
out by our Authorised Service Centre.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
installation.
Do not touch the mains cable or the mains plug
with wet hands.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Only for UK and Ireland: The appliance has a 13
amp mains plug. If it is necessary to change the
fuse in the mains plug, use a 13 amp ASTA (BS
1362) fuse.
This appliance complies with the E.E.C.
Directives.

WATER CONNECTION

Make sure not to cause damage to the water
hoses.
Before you connect the appliance to new pipes
or pipes not used for a long time, let the water
flow until it is clean.
The first time you use the appliance, make sure
that there is no leakage.
USE
WARNING! Risk of injury, electrical
shock, fire, burns or damage to the
appliance.
Use this appliance in a household only.
Obey the safety instructions on the detergent
packaging.
Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
Make sure that you remove all metal objects
from the laundry.
Do not put a container to collect possible water
leakage under the appliance. Contact the
Authorised Service Centre to ensure which
accessories can be used.
Do not touch the glass of the door while a
programme operates. The glass can be hot.
DISPOSAL
WARNING! Risk of injury or
suffocation.
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
Remove the door catch to prevent children and
pets to get closed in the appliance.
3
Tabla de contenido
loading

Tabla de contenido