Dimensional Clearances - Alliance Laundry Systems SF18VNV Instalación/Mantenimiento

Installation

Dimensional Clearances

Both single and multiple machine installations
require specified minimum clearances on all
sides of each machine. The table below shows
these clearances.
See Figures 2 and 3 for dimensions of
18-pound and 25-pound capacity models.
Figure 4 provides installation guidelines for
sites with multiple installations.
Minimum rear clearance
Minimum clearance between machine and wall
Minimum clearance between machines (side)
Minimum front clearance
14
Cabinet Freestanding
Recommended Minimum Clearances
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
The dimensions shown here are for
Note:
planning purposes only. They are approximate
and subject to normal manufacturing
tolerances. If exact dimensions are required
for construction purposes, contact the
distributor or manufacturer. We reserve
the right to make changes at any time
without notice.
18
[in (mm)]
12 (305)
2 (50)
1 (25)
16 (406)
25
[in (mm)]
12 (305)
2 (50)
1 (25)
17.5 (445)
F232060