Print Settings - Olympus CAMEDIA E-100RS Manual Básico

PRINT SETTINGS

Selected images can be reserved in a card for printing on a printer or at a photo lab
that supports the DPOF (Digital Print Order Format) system.
Print reserve cannot be performed for a picture displayed with
To perform print reserve for a sequential shot, you have to EXTEND beforehand, then
display the sequential shot you want to print.
Single-frame print reserve
Press . The Print reserve setting screen is displayed. Press
to select , then press the OK button. The print reserve selection screen is displayed.
Press the Arrow pad to select the picture you wish to print. Press the OK button. The
setting menu is displayed. Press
the number. Press
Press to select
the OK button to complete the setting. Press
mode and returns to the playback mode.
All-frame print reserve
Allows you to store print data for all the pictures on the card, as well as allowing you to
choose how many prints you want.
Trimming print reserve
You can print an enlarged part of a recorded picture.
Resetting print reserve
This resets all the print reserve settings for images saved in a card.
Press . The Print order setting screen is displayed. If there are no pictures on the
card, this screen is not displayed. Press
button. To keep the print order, select KEEP and press the OK button.
To remove the selected image only, select KEEP, then set the number of prints in
single- frame print reserve to 0.
To perform print reserve for additional pictures, select KEEP. Print reserve can be
added to the print reserve data already stored on the card.
Note:
This camera cannot be directly connected to printers.
If a card contains DPOF reservations set by another device, entering reservations
using this camera may overwrite the previous reservations. Be sure to use this
camera for reservations.
38
to select
to select , then press
TRIMMING, then press
.
on the Arrow pad
x, then press
to select DATE, TIME or NO.
to select YES or NO. Press
. The screen exits the Print reserve
to select RESET, then press the OK
to enter