Idiomas disponibles
Idiomas disponibles
Occupancy/Daylight Harvesting Sensor
Installation – end of row
Sensor Option Installation Section
The endcap includes the sensor preassembled. Connect
the RJ11 cable coming from the end of the fixture to the
pigtail in the sensor. Snap endcap in place per the standard
installation instructions. Tuck wire harnesses and safety
cable while installing. Endcap tabs must fully engage in the
metal bracket. (Figure 38.)
Figure 37. Sensor Preassembled
Sheet metal Bracket in
Waveguide
Figure 38.
Pigtail
RJ11
Endcap Tab
Installation Instructions – WaveStream Linear
Occupancy/Daylight Harvesting Sensor
Installation – middle of row
Sensor Option Installation: (Row Mount only) Section
(Step 1-5)
1.
Rotate upper endplate, bend flange as shown and
rotate back to its original position in the Channel
assembly. (Figure 39.)
Flange
Endplate
Flange
Figure 39.
2.
Insert Channel Joiner to one of the channels and insert
another channel to the other end of Channel Joiner. This
creates a gap between fixture to install sensor.
Figure 40.
3.
Install screws to secure Channel Joiner.
Figure 41.
COOPER LIGHTING SOLUTIONS
Channel Joiner
IB519017EN
Installation instructions
Screws
9
