Idiomas disponibles
Idiomas disponibles
4 ft. and 8 ft. – Continuous Row Installation
Row Mount Installation Section (Step 1-12)
1.
Remove channel assembly from box, remove
tape around channel cover and install in surface
or suspended ceiling according to code (hardware
provided by others).
Figure 16.
2.
Rotate upper endplate, bend flange as shown and
rotate back to its original position in the Channel
assembly. (Figure 17 .)
Flange
Endplate
Flange
Figure 17.
3.
Insert row aligner to one of the channels and insert
another channel to the other end of row aligner.
(Figure 18.)
Row Aligner
Figure 18.
Openings at both ends
can be used for surface
mounted or suspended
applications
Installation Instructions – WaveStream Linear
4.
Install screws to secure row aligner.
Screws
Figure 19.
Optional: Special rigid channel connector designed to give
extra support to continuous channel installation. Provision
for hanging device
Figure 20.
Figure 21.
Figure 22.
COOPER LIGHTING SOLUTIONS
Long Connector
IB519017EN
Installation instructions
5
