Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
ADF140668
Installation Instructions – SN LED
Instructions d'installation - DEL SN
Instrucciones de instalación de la luminaria LED SN
IMPORTANT: Read carefully before installing fixture. Retain
for future reference.
warning
risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a person
familiar with the construction and operation of the
product and the hazards involved. Cooper Lighting
assumes no responsibility for claims brought about
by improper or careless installation or handling of this
product.
aTTEnTiOn
receiving Department: note actual fixture description
of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly
with carrier. Claims for concealed damage must be
filed within 15 days of delivery. all damaged material,
complete with original packing must be retained.
CauTiOn
Edges May Cut. Handle with care.
CauTiOn
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
warning
risk of Fire and Electric Shock. if not qualified, consult
an electrician.
nOTiCE
Green ground screw provided in proper location. Do not
relocate.
nOTiCE
If supply wires are located within 3 inches of ballast, use
wire rated for at least 90°C (194°F).
Brand Logo
reversed out of
black
INS #
INS #
Manuales relacionados para Metalux SN LED
Resumen de contenidos para Metalux SN LED
- Página 1 Brand Logo reversed out of black INS # INS # ADF140668 Installation Instructions – SN LED Instructions d’installation - DEL SN Instrucciones de instalación de la luminaria LED SN IMPORTANT: Read carefully before installing fixture. Retain CauTiOn for future reference.
- Página 2 Installation Instructions – SN LED INSTALLATION SN LED Remove product from packaging. Channel covers are not fastened for installation purposes. Wire according to code. Install channel cover with screws provided (Figure 1.). Figure 3. Row Aligner Instructions Rotate end, pulling slightly the channel apart and pushing the bottom of the end (Figure 2.).
- Página 3 Instructions d’installation - DEL SN IMPORTANT : Lisez attentivement avant d’installer le MiSE En garDE luminaire. Conservez pour une référence future. Risque de brûlures. Mettez l’alimentation électrique hors aVErTiSSEMEnT tension et laissez refroidir le luminaire avant de le manipuler ou de changer la lampe. risque d’incendie, de décharge électrique, de coupures et autres risques de blessures.
- Página 4 Instructions d’installation - DEL SN INSTALLATION DEL SN Retirez le produit de l’emballage. Les protecteurs du canal ne sont pas fixés à des fins d’installation. Câblez conformément aux codes. Installez les protecteurs du canal à l’aide des vis fournies (Figure 1.). Instructions pour l’aligneur de rangées Figure 2.
- Página 5 Instrucciones de instalación de la luminaria LED SN IMPORTANTE: Lea atentamente antes de instalar la PrECauCiÓn luminaria. Conserve estas instrucciones para tenerlas como referencia futura. Riesgo de quemadura. Desconecte la alimentación y deje que la luminaria se enfríe antes de cambiar la bombilla o aDVErTEnCia manipular la luminaria.
-
Página 6: Instalación
Instrucciones de instalación de la luminaria LED SN INSTALACIÓN Luminaria LED SN Extraiga el producto de su embalaje. Las cubiertas del canal no se encuentran ajustadas para su instalación. Realice el cableado de la luminaria de acuerdo al código. Instale la cubierta del canal con los tornillos provistos (Figura 1.). - Página 8 Warranties and Limitation of Liability Please refer to www.cooperlighting.com/warrantyTerms for our terms and conditions. Garanties et limitation de responsabilité Veuillez consulter le site www.cooperlighting.com/warrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.cooperlighting.com/warrantyTerms para conocer nuestros términos y condiciones. Eaton 1000 Eaton Boulevard Cleveland, OH 44122...