Tabla de contenido
SKYFOOD EQUIPMENT LLC - SERVICE
For questions or assistance with products FLEETWOOD by SKYMSEN and SKYMSEN,
call SKYFOOD EQUIPMENT Toll Free : 1-800-503-7534, 24h Customer support, or visit
the Customer Service section of www.skyfood.us.
SKYFOOD'S LIMITED WARRANTY
Unless otherwise
specified,
new FLEETWOOD by SKYMSEN and SKYMSEN products,
excluding accessories, sold by SKYFOOD EQUIPMENT, LLC. ("SKYFOOD"), for use only
in the continental United States (collectively, "Products" or singularly, "Product"), are
warranted to be free from defects in materials and workmanship for a period of one (1)
year from the date of purchase by the original purchaser/user ("End User"). Several new
products and accessories may be warranted for a period other than one (1) year while
others may be subject to travel limitations, as specified on the products Instruction Manual.
Proof of purchase must be presented; if not this warranty will be VOID. No warranty is
given or implied to a subsequent transferee or any other third party. This warranty is
expressly conditional upon SKYFOOD being notified of any defects in materials or
workmanship within five (5) days of its occurrence, within the warranted time period. If a
notice of a claim under this warranty is timely made by the End User, SKYFOOD or a
SKYFOOD's designated service company ("Service Company"), will repair or replace the
Product, at SKYFOOD's discretion, subject to the additional conditions hereinafter
described.
This warranty shall not apply if damage occurs from improper installation or maintenance
performed by an unauthorized service company ("Service Company"), wrong voltage, nor
to the extent that Products or parts have been used other than in conformance with
operating and maintenance instructions, subjected to misuse or abuse or damaged by
accident, acts of God, abnormal use, stress or any other matter unrelated to SKYFOOD,
and beyond its reasonable control. This warranty does NOT cover service labor and
travel to perform adjustments on products and/or accessories. In addition to wear and
tear of certain items, such as, but not limited to; glass parts, blades, stones, chopper
cutting knives, plates, slicing knives, cutting disc, gaskets, oil changes, sealing tape, heat
seal wires, worm gears, self-lubricating bushings, carbon brushes for electric motors, and
other parts expendable by nature and that need to be replaced frequently. Electrical
components are subject to natural wear and tear, and are NOT covered by this
warranty. THIS WARRANTY EXCLUDES ALL ORAL, STATUTORY, EXPRESS OR
IMPLIED WARRANTIES WHICH MAY BE APPLICABLE TO SKYFOOD, INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND
FITNESS FOR PARTICULAR PURPOSE. Under no circumstances shall SKYFOOD be
liable for loss of use, revenue or profit or for incidental or consequential damages.
SKYFOOD shall under no circumstances be liable for any loss, damage, concealed
damage, expense or delay of goods for any reason when said goods are in the custody,
possession or control of third parties selected by SKYFOOD to forward, enter, clear,
transport, or render other services with respect to such goods. The sole and exclusive
remedy for breach of any warranty is limited to the remedies provided in the paragraph
above.
All products held at non-commercial facilities or domiciles, must be taken or shipped,
shipping charges prepaid, either to SKYFOOD's facility or a SKYFOOD's designated
3 . Operation
3.1 Starting
Before removing Cup Nº02 (Fig.01), check if the motor is completely stopped,
otherwise accidents and damages to your product may occur.
To start machine use ON/OFF switch Nº06 (Fig.01) located on Motor
Housing Nº04 (Fig.01).
Blenders equipped with OVERLOAD SWITCH, code 25800.8 with serial number
up to 31 will be turned OFF automatically if there is an excessive temperature
increase. When it happens turn ON/OFF switch to OFF position immediately and
disconnect plug from wall socket as the Blender will turn ON AUTOMATICALLY
WHEN THE TEMPERATURE COOLS DOWN, WHICH MAY CAUSE ACCIDENTS.
Wait for minimum 15 minutes before turning Blender ON again. In case motor
does not start after the Blender has been turned ON, turn it OFF immediately and
disconnect plug from wall socket and call your Distributor for technical
3.2 How to Feed the Blender
The TA-04 Blenders are machines working at high speed ( approximately
22,000 rpm off load ) .
To feed it observe the following instructions :
Cut the product in small pieces , about 1.5 inches wide , such precaution helps
to decrease the blending time process , mainly when working with frozen products . When
working with ice it is recommended to join a little water .
Withdraw the Lid No.01 (Pic.01) .
Place the product inside the Bowl No.02 (Pic.01) .
Close the Bowl with the Lid , and Switch ON the machine .
The necessary processing time will be different for each kind of
NEVER SWITCH ON THE MACHINE BEFORE LOADING ITS
BOWL , BECAUSE IRREPARABLE DAMAGE WILL RESULT .
3.3 Cleaning
Never clean the machine when plugged to the electric network . Before
cleaning , withdraw the plug from the socket .
Before to withdraw the Bowl be sure the motor has stopped completely .
Important
Important
assistence.
Observation
IMPORTANT
Important
04
Tabla de contenido
