Cold Water Use - Beuchat VRT 30 Manual De Instrucciones

Ocultar thumbs Ver también para VRT 30:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

C > Venturi lever
This lever, located on the side of the second stage
Housing, enables the diver to contr
Venturi effect. When on the + position, the diver get
maximum Venturi assistance upon initial inhalation, the
air flow is maintained without additional ef fort.
Important : On the surface to avoid any fr ee flow resul-
ting from surface waves and / or sudden entry in the
water , the diver should keep the lever pushed towar ds
the front in the - / minus position. This position should be
maintained whenever the second stage is used as an
octopus for a safe second stage.
At the beginning of the dive, the diver should push the
Venturi lever in the + / plus position, to obtain optimum
breathing characteristics. The + / plus position is the "dive
mode" position.
Note :
• The V30 first stage 3/8" LP ports can accommodate the
safe second stage octopus and the buoyancy compensa-
tor LP hose and / or drysuit inflator hose.
• On the 7/16" HP ports, install a pr essure gauge to check
VRT 30 - VRT 30 NITROX - VRT 30 "Cold type" / User guide
ol the inhalation
air supply during the dive (right or left position).
• A 3300 psi DIN connection kit can be installed on the
V30 first stage by a BEUCHAT authorized dealer.
• A 3300 psi DIN to yoke adapter is available under r ef.
#16740 to allow the mounting and the use of a DIN r e gu-
lator on a standard K-valve cylinder.

2 - COLD WATER USE

Use of regulators in water temperature colder than 50 F /
10° C, requires special equipment and precautions.
Only the VR T30 "Cold type", VR T80 Evolution, VX10
Iceberg, VX200 Iceberg, VR200 Soft T
Evolution et VR200 Iceberg should be used in cold water
diving.
1. Make sure that your air supply meet the EN 12021 qua-
lity norm requirements.
2. Use a cylinder with a dual outlet Y-valve and two inde-
pendent breathing system outfitted for cold water use.
3. Do not expose the regulator to cold air (colder than 32
F / 10°C). Place the regulator first stage in the cold water
to bring its temperature up before use.
4. Do not purge the second stage outside the water to
> 37
ouch, VR200
Tabla de contenido
loading

Este manual también es adecuado para:

Vrt 30 nitroxVrt 30 icebergVrt 30 octopus icebergVrt 80 evolutionVx 10 icebergVx 200 iceberg ... Mostrar todo

Tabla de contenido