Kathrein EXI 3591 Manual Del Usuario página 18

1. Press about 12 seconds on the button „pairing". Both LEDs go out momentarily. The
network key is deleted. The LED "power" lights "Coax/link" is missing. Perform this step
on all your devices that you want to add to a private network through!
2. Now click on one of your modems short (approximately 1 second) on the button "pairing".
The "Power" LED starts blinking. Now press the next button shortly modem "pairing".
Both modems negotiate a secret network key and connect to each other. You have
about three minutes for pressing the second button. When the process is completed,
both LEDs light up constantly again. Each additional modem can be added in the same
manner to the private network. The pairing can be started from any modem in your
private network.
Reset:
With the "Reset" button, the modem to factory setting reset. Since in this case also the origi-
nal factory network key is set, the modem is generally visible again and no longer belongs
to the private network.
Stand-by:
Modem switches after a few minutes without traffi c automatically to stand-by mode.
The "Power" LED blinks slowly (red - green).
Overview LED
"Power" LED
"Coax/Link" LED
Ethernet socket
LED left
LED right
LED ...
Lights up green
Lights up red
Is off
Lights up green
Lights up orange
Lights up red
Is off
Blinks orange
Lights up green
Is off
Status Modem
In operation
Stand-by
No power supply
Connection made in coax networks
(optimal combination)
Connection still good
Poor connection - data throughput decreases
Damping is too high (> 90 dB),
interruption or no suitable network key
Ethernet activity
Gigabit connection
At ≤ 100 MBit connection
6 / 12