Kathrein EXI 3591 Manual Del Usuario página 13

Sat-IF distribution system (4 x sat-IF)
Single cable multi-switch with integrated modem
Features single-cable multi-switch
Cascadable single-cable multi-switch

with an integrated modem for the
distribution of Sat-IF signals (four Sat
polarisations) and terrestrial signals to
up to nine receivers
The selected transponder is transmit-

ted by the multi-switch on a fi xed fre-
quency (user band), controlled by the
receiver with a DiSEqC™ command
set conforming to EN 50494
The multi-switch supports the extended

single-cable set of commands SCD2
conforming to prTS 50607
(see also "Notes" section)
Terrestrial signals can be received

even when the satellite receiver is
switched off
Each receiver is assigned a fi xed

subscriber frequency (a twin receiver
requires two subscriber frequencies)
Creation of a home network using the

existing terrestrial distribution. The IP
data is available on every subscriber
output. Installation complexity is redu-
ced as no additional network cabling is
required.
PIN Code: Protects the user frequency

from being accessed by another user.
This allows an installation in an apart-
ment building
EXI 3591
geeignet für DVB-T
Integrated AGC (Automatic Gain Con-

trol) ensures a constant output level in
the Sat-IF range
Integrated, highly-selective frequency

diplexer for IP data
Low power consumption due to highly

effi cient, short-circuit proof switched-
mode power supply unit in compliance
with ERP guideline and energy-saving
concept (the single-cable multi-switch
is switched off whenever the connected
receiver is switched off)
Kathrein-Power-Saving: LNB supply is

switched off as soon as all receivers
are inactive. This function can be de-
activated if loop-through multi-switches
without Kathrein Power Saving are
used in the cascade
LNB remote feeding via the horizontal

low input.Signaling Kathrein power
saving over the trunk "vertical low." All
other inputs are voltage-free
For indoor installation


1 / 12
20510065