Kathrein EXI 3591 Manual Del Usuario página 16

Kathrein Power Saving
If an EXI 3591 is run on its own or alongside other multi-switched Kathrein-Power-Saving-
logo devices, then Kathrein power saving switch can be activated with the "On" button. If a
receiver is switched on in the cascade, from the end of the LNB multiswitch is powered.
Multi-switches without Kathrein Power Saving do not give signalling to the
end multi-switch. The stand-by switch must be set to "OFF" for permanent
powering of the LNB.
Type Product type
VWS 2551
EBX 2520 Two-way splitter
EAX 2512 Two-way tap
VWS 2500
PIN code protection
The multi-switch is protected by a PIN code in order to prevent the set userband from being
used/disturbed by another subscriber. This should be specifi ed in the receiver settings. A
fi xed PIN has been assigned to each userband.
UB 1
Frequency
974
(MHz)
Pin 151
Note: If the terrestrial frequency
Amplifi ers
range is used, the VWS (amplifi er)
Can be used without restriction if
each trunk has been terminated
Amplifi ers
UB 2 UB 3
1076 1178
052 133
Kathrein Power Saving
Can be used without restriction
must be locally powered.
with a Kathrein Power Saving-
capable end multi-switch.
Not compatible with
Kathrein Power Saving
Not compatible with
Kathrein Power Saving
UB 4 UB 5
1280 1382
124 205
4 / 12
Switch position
UB 6 UB 7 UB 8
1484 1586 1688
196 187 178
ON
ON
OFF
OFF
UB 9
1790
099