Kathrein EXI 3591 Manual Del Usuario página 14

Features built-in modem
Modem for Kathrein IP over coax sys-

tem "K-LAN" (based on the standard
IEEE 1901)
Ideal for networking of receivers,

TV sets and Blu-ray players. Other
network-capable units such as PCs can
also be easily connected using a router
(e.g. FRITZ!Box)
> 500-Mbit data throughput (gross)

allows several HD streams during si-
multaneous data transmission between
PCs. Due to QoS *
are prioritised
High screening values ensure distur-

bance security
128 bit AES encryption: Secure, private

network connection at the press of a
button - no software required
Eco Power Mode: The modem switch-

es automatically to "stand-by" and is
"woken up" again through the network.
Consumption: 1.0 watts in stand-by
mode/4.2 watts in operational mode
* ) QoS = Quality of Service
relevant services
)
Accessories
Sockets of the ESR series are used

despite limited frequency range for
K-LAN.
Protection of the system function in

receiver malfunction: power of the
connected receiver, if this is not the
single-cable DiSEqC
according to EN 50494 is used (cutting
off the power from the satellite terminal
to input at +18 VDC to 400 ms)
End-user modem EXI 01 (Order no.

20510061): To reconvert IP data on
subscriber outlets (e.g. to connect a
satellite receiver with an Ethernet port)
Software EXI 700: Shows the function-

ing modems in a network (Downloada-
ble from: www.kathrein.de)
High pass EXI 90 (BN 20,510,062): If

additional multi-switch (not from the
EXI series) cascade and the EXI 01 is
operated at one of these multi-switch,
the high-pass must be screwed onto
the terrestrial input of the multiswitch.
This subsequent multiswitches are
isolated and prevented the incoming
and outgoing radiation of the frequency
range of IP and terrestrial antenna in
the cascade. EXI 3591 in the high-pass
is already integrated
2 / 12
instruction set
TM