Using The Components; Switching The Components On/Off - Sennheiser evolution wireless Serie Instrucciones Para El Uso

22

Using the components

Switching the components on/off

The ew 100 G2 transmitters and receivers can only be switched off when the
standard display is shown on the display panel. Within the operating menu,
the ON/OFF button or the POWER
(cancel) key, i.e you cancel your entry and return to the standard display.
Note:
Remove the batteries or the accupack when the units will not be used for
extended periods of time.
Switching the rack-mount receiver on/off
Press the POWER button
To switch the receiver off, press the
the display.
Switching the bodypack receiver/transmitter on/off
Press the two unlocking buttons
cover .
Press the ON/OFF button
on. The red LED lights up.
To switch the bodypack receiver/transmitter off, press the
until "OFF" appears on the display. The red LED
Close the battery compartment. The battery compartment cover
into place with an audible click.
Switching the plug-on transmitter on/off
Press the ON/OFF button
LED lights up.
To switch the plug-on transmitter off, press the
"OFF" appears on the display. The red LED
button (EM 100 G2 only) serves as the ESC
to switch the receiver on.
POWER button until "OFF" appears on
and open the battery compartment
to switch the bodypack receiver/transmitter
goes off.
to switch the plug-on transmitter on. The red
ON/OFF
goes off.
ON/OFF button
locks
button until