GE Appliances 22 Manual Del Usaurio página 11

Shelves and Bins
Not all features are on all models.
Freezer Baskets
(on some models)
To remove, slide out to the stop
position, lift the front past the stop
position, and slide out.
Make sure you push the baskets all
the way back in before you close
the door.
Freezer Baskets
(on some models)
To remove, push the basket
all the way to the back of the
pins are disengaged. Lift the
entire basket up and pull out.
Make sure you push the
baskets all the way back in
before you close the door.
QuickSpace™ Shelf
This shelf splits in half and slides
under itself for storage of tall
items on the shelf below.
This shelf can be removed and
replaced or relocated just like
Slide-Out Spillproof Shelves.
On some models, this shelf can not be used in the
lowest position.
Slide-Out Freezer Shelves
To remove, slide out to the stop
position, lift the front past the stop
position, and slide out from rib.
Make sure you push the shelves
all the way back in before you
close the door.
Fixed Freezer Shelves
To remove, lift the shelf up at
the left side and then bring the
shelf out.
NOTE FOR DISPENSER
MODELS:
advantage of the tilt-out ice bin
(on some models), only store
items on the shelf below the ice bin that are no taller
than the lowest point on the bin.
49-60646-6 Rev. 7
(on some models)
Door Wine/Beverage Rack
This rack holds up to 5 cans, one
bottle of wine or one 2-liter bottle
of soda.
The rack hangs from the sides of
the dairy bin.
To remove:
1. Empty the wine/beverage rack.
2. Holding the bottom of the dairy
bin, lift the front straight up, then
lift up and out.
3. To detach the rack from the dairy
bin, pull the rack's side wires out
of the holes on each side of the
dairy bin.
To replace:
1. Reattach the rack to the sides of the bin.
2. Engage the back side of the bin in the molded
supports on the door. Then push down on the front of
the bin. The bin will lock into place.
ShelfSaver™ Rack
Use this rack to store beverage
cans for easy access.
dish.
Door Can Rack
(on some models)
This door rack holds up to 9
cans.
NOTE: This rack can only be
mounted in the top position
under the dairy bin.
Removable Beverage Rack
(on some models)
The beverage rack is designed
to hold a bottle on its side.
slide-out shelf.
To install:
1. Line up the large part of
the slots on the top of the
rack with the tabs under the
shelf.
2. Then slide the rack back to
lock it in place.
(on some models)
(on some models)
1
2
11