Technical Data; Noise Information; Vibration Information - Worx WX641 Traducción De Las Instrucciones Originales

TECHNICAL DATA

Type WX641 WX641.1 WX642 WX642.1(635-644-designation of machinery,
representative of finishing sander)
Voltage
Power Input
No-load speed
Base size
Orbital diameter
Protection class
Machine weight

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection when sound pressure is over

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
The declared vibration total value may be used for comparing one tool with another, and may
also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
Finishing Sander
WX641 WX641.1
230-240V~50Hz
250W
12000/min
90x187mm
Vibration emission value a
Uncertainty K = 1.5m/s²
WX642 WX642.1
270W
6000-12000/min
1.6mm
/ll
2.0kg
L
L
wA
= 5.391m/s
2
h
: 82.3dB(A)
pA
: 93.3dB(A)
3.0dB(A)
7
80dB(A)
EN