VWR VisiScope 400 Serie Manual De Instrucciones página 8

Installing the condenser
illumination unit and the LED
housing
1. Insert the condenser illumination unit into
the bracket. (Fig.10)
2. Turn the condenser illumination unit
clockwise about 90°, with the "AS" mark of
filter holder facing forwards. Screw the 2
fixing mut with the supplied allen wrench.
(Fig.11)
3. Insert the connector plug ② into the con-
nector jack.
4. Push the LED housing gently into the
holes of the illumination unit. (Fig.12)
Installing the color filters
► Remove the filter holder, then install the
color filters you need. (Fig.13, Fig.14)
Mount the color filter flat as shown in ①,
verifying that they are not tilted.
► If the color filter is tilted or otherwise
②
out of place , it may fall.
②
The color filters can be stacked in the
holder. This allows to install as many filters
as needed, as long as the whole thickness
is less than 11 mm.
①
8
Fig.10
Fig.11
Fig.12
Fig.13
Fig.14