Clutch - CLIPIC MECHA Manual Del Usuario

Major components
Before riding the motorcycle, be sure to check daily
the following items:
1. Check the front brakes system for leakage of brake fluid.
2. Check the oil pressure line for leakage of fluid or tears.
3. Check the brake lever for freeplay.
4. Check the front brake lining for wear.
WARNING
When the new brake lining begins to be used, donÊt
ride your motorcycle immediately after the replace-
ment. Apply the brake, release it, then spin the wheel
and check that it rotates freely. Repeat this procedu-
res several times and allow the brake fluid to circulate
normally.

CLUTCH

Clutch adjustment may be required if the motorcycle stalls
when shifting into gear or tends to creep; or if the clutch
slips, causing acceleration to lag behind engine speed. Minor
adjustments can be made with the clutch cable adjuster (4)
at the lever (1).
Normal clutch lever free play is:
10-20mm (0.4-0.8in)
96
1
10-20mm (0.4-0.8in)
1. Clutch lever