Consumer Informations - CLIPIC MECHA Manual Del Usuario

Consumer informations

ACCESSORY INSTALLATION AND SAFETY PRECAUTION TIPS
There are great variety of accessories available to CLIPIC owners. The addition of unsuitable
accessories can lead to unsafe operating conditions. For proper installation of accessories,
we have laid down some principles which will help you for the correct choice and installation
of accessories.
(1). If you want to install a accessory which will result in a extra weight or a aero-
dynamic effect to your motorcycle, try to install it as low as possible and as close as
possible to the center of gravity of your motorcycle. Check carefully the holder for
installing accessories to make sure for its firmness. The infirm installation will lead to
unstable and dangerous conditions due to weight deviation.
(2). Check the net clearance and turning angle to make sure that they are adequate.
The improper load, which may occure after installing accessories, will very lidely lo-
wer their safery factors. Checks should also be made that this improper load will not
hinder the idling, tunning and other control actions.
(3). Fixing the accessories on handlebars or front fork will result in unstable opera-
tion. This extra weight will reduce the maneuverability of your motorcycle during tur-
ning operations, mean while, this extra weight will also cause unstable condition due
to vibration at the front end. Therefore, fixing accessories on hadlebars or front fork
should be minimized.
CONSUMER INFORMATIONS
84