Rear Brake Pedal Level - CLIPIC MECHA Manual Del Usuario

Major components

REAR BRAKE PEDAL LEVEL

Adjustment:
1. Place the motorcycle on its side stand.
2. The stopper bolt (1) is provided to allow adjustment of
the pedal height.
To adjust the pedal height, loosen the lock nut (2) and turn
the stopper bolt. Tighten the lock nut.
1. Stopper bolt
3. Measure the distance the rear brake pedal (3) moves befo-
2. Lock nut
re the brake starts to take hold.
3. Rear brake pedal
Free play should be:
20-30 mm (0.8-1.2in)
4. If adjustment is necessary, turn the rear brake adjusting
nut (4).
Make sure the cut-out on the adjusting nut is seated on the
brake arm pin (5) after making final free play adjustment.
If proper adjustment cannot be obtained by this method see
4. Adjusting nut
your Honda dealer.
5. Brake arm pin
A. Decrease free play
5. Apply the brake several times and check for free wheel ro-
B. Increase free play
tation after the brake pedal is released.
94